Support for clematis with your own hands - ideas for coasters

Blooming lianas, including clematis, are often used in landscape design to decorate the backyard. In order for a climbing plant to develop fully, it needs support. Thanks to this, all the decorative characteristics of the flower are revealed.

Why do you need a support for clematis

There are several ways to create a support yourself. It only takes a little time and a limited amount of readily available materials.

The support densely overgrown with clematis looks fabulous

Features of growing clematis

Clematis bushes planted in open ground can grow in one place for decades. They are transplanted only if absolutely necessary, since the procedure can only harm the widely overgrown root system of the plant.

The best places for clematis

When choosing a corner where to plant clematis in the country, it is recommended to avoid areas near large plants and trees that will interfere with the development of flower roots. Also, do not plant a bush in a place where moisture stagnates, otherwise it may die from decay and the onset of fungal diseases.

Note! A space open to the sun is most suitable. To create ideal conditions near clematis, it is worth arranging a flower bed with undersized flowers and herbs near it.

Why does clematis need support

Plants can stretch up to 4 m in length, and in some varieties up to 8 m. It is for this reason that a heavy climbing bush needs support. In addition to this function, having a support provides other positive results:

gives clematis a great decorative effect;
due to better air circulation, slugs and snails do not start on the flower;
facilitates the conduct of care procedures for watering, spraying, fertilizing and pruning.

In addition, the supporting structure, entwined with clematis, opens up opportunities for the gardener's creative imagination.

Requirements for supports

There are a number of requirements that a flower stand must meet. The most important qualities that a structure should have are strength and lightness. Therefore, preference is usually given to supports made of wood or metal reinforcement. Sometimes a chain-link mesh is also used. The most comfortable coasters are created from these materials.

The structure must withstand powerful overgrown vines

Purpose and options for using trellis for clematis in landscape design

DIY drip irrigation for indoor plants

Flower trellises can have different purposes, dictating the choice of their design and methods of use. Here are just some of the options:

overlapping with lattices of window openings and the roof of the garden gazebo;
fastening to the walls of buildings, the walls of which need to be decorated;
pyramidal stands in the garden;
decorating recreation areas;
creating an arch over the entrance gate;
installation of several pergolas, forming a tunnel over the garden path.

For your information! Also, if you wish, you can arrange the site with your own hand created or purchased welded figures, which will braid the overgrown clematis.

Types of supports and materials for their self-production

A support stand for clematis can be made by hand using several methods. After examining them, the site owner can choose the most suitable one.

Material for the manufacture of supports

DIY money tree bonsai

Quite often, when creating flower stands and trellises, materials left after repair work are used. Most often, they are used in garden structures:

wooden slats and boards;
metal pipes and pieces of reinforcement;
plastic mesh or pieces of chain-link;
old doors and window frames.

Note! Having carefully looked at the items stored in the garage or pantry, some summer residents create supports from old wheels, furniture parts, fishing accessories, wire, and a linen cord. Also, branches, twigs, vines are often used.

Wooden pergola

The pergola is a lattice canopy made of slats about 5 cm wide, placed vertically or horizontally. Such partitions are often used to decorate openings in gazebos. It can also be attached to the wall of the building or installed anywhere on the site as an independent structure.

Wooden trellises can be of different shapes

Arched metal structure

The metal arch for clematis serves for a long time and is able to withstand the weight of the overgrown lashes of the plant. You can extend the life of such a stand by regularly covering it with a fresh coat of paint or varnish.

With the skills and welded equipment, you can make the structure yourself. In the absence of skills, it is recommended to opt for a chain-link mesh or a ready-made reinforcement stand. Interesting arched supports are widely represented in specialized stores.

Types of supports

Do-it-yourself autowatering for indoor plants

Among the existing support structures for flowers, several are the most popular. Clematis in landscape design is tied to just such holders.

Hedge decoration

The fence that encloses the cottage is made of sectional trellis trellis. Finished structures are dug in along the perimeter of the site and climbing plants are planted along them.

Rebar arch

A reinforcement arch is created by bending two rods held together by rings. For the manufacture of such a support, there is no need for a welding machine.

Wooden pergola

A support of this type is constructed from 2 wooden frames. They are installed opposite each other, and above them there is an upper horizontal partition, which serves as an additional fastening.

Wall trellis for clematis

The clematis lattice support is easily fixed on the wall of a summer cottage. The optimal size of the slats used for this design is 40 × 10 mm. There should be enough space between the wooden planks so that the plant can easily cling and curl. Usually, the trellis mesh consists of square or diamond-shaped holes 5 × 5 cm. A distance of more than 20 × 20 cm will make it difficult to attach the clematis shoots to the support.

On a structure with the correct cross-section, the plant will feel comfortable

Important! It is very important to dig in the trellis deep enough, securing it well. Otherwise, it can be knocked down by strong gusts of wind in bad weather, which will damage the plant.

Flower tripod

An excellent support for flowers is a pyramid-shaped tripod. It is constructed from several vertical rods converging at the top of the structure. At several levels, the structure is fastened with transverse strips.

How to make a support for clematis with your own hands

After choosing the right material and determining the type of support, you can create it yourself. This simple exercise will only take a little time.

Creating a support for clematis from a chain-link mesh

Despite the seeming simplicity, a do-it-yourself clematis stand from a chain-link mesh looks very attractive when it is completely covered with flowers in June. To create it, you need the following parts and tools:

a piece of chain-link;
metal wire;
pieces of plastic pipe;
screws;
knife;
pliers;
screwdriver.

The use of a chain-link does not diminish the decorative effect of the flower

It is easier to create such a structure with the efforts of two people. The sequence of actions will be as follows:

The support pipes are adjusted to the intended size in accordance with the drawing.
A mesh-netting is laid out on the ground and plastic pipes are threaded into its extreme links along the perimeter. The legs should remain at the bottom of the partition.
The structure is stretched on the ground and the joints of the tubes are fastened with wire.
The trellis is installed in a chosen place next to the building, digging the legs into the soil.
The upper part of the support is inclined to a stable vertical support (fence, wall) and fixed with screws.

Note! This support is considered the most economical of all possible options.

Do-it-yourself arch for clematis from fittings

A similar support is created from 2 reinforcing rods of the same length, bent with a vice in the shape of an arch. The rods are fastened with transverse strips, screwing them with screws. The finished arch is covered with paint and dug into the ground by 0.5 m.

For your information! If desired, you can additionally fix the same mesh-netting around the structure, making the arch more rounded.

Wooden planks for wall decoration

Often, the walls of buildings are completely trimmed with wooden pergolas. The size of such a support can be up to 3.5 m in height and width. The main concern here is the strength of the fastening. For this, holes are drilled in the wall, and the structure is hung with dowels.

How to tie up clematis so that it curls beautifully along the support

Knowing how to tie clematis to the supporting partition, you can create a very beautiful corner on the site. An improperly tied plant will overload the structure and develop poorly.

How to tie flowers to a support correctly

The lianas should be evenly distributed over the entire support and tied. Shoots should be placed in one layer without overloading the trellis. In this case, it is important that all parts of the plant are well lit.

Important! It is recommended to use twine as a material for the garter.

Clematis on a support is able to decorate any garden building

Before planting climbing vines - climbing roses or clematis, you should carefully consider what they will rely on when they actively grow. In adulthood, such plants reach impressive sizes, and the lack of reliable support can affect their condition.